[8.1.2] RF option screen
SET RF OPTION
1:POWER SAVE
ON OFF
2:WEP
ON OFF
3:AUTHENTICATE OPEN SHAREDKEY
SET RF OPTION
1:POWER SAVE
ON OFF
2:WEP
ON OFF
3:AUTHENTICATE OPEN SHAREDKEY
Set up?
1:Yes 2:No
Chapter 2. Getting Started the BHT and System Mode
BHT-7500W
Selecting the "2:RF OPTION" on the RF parameter menu displays the "** Now Loading **." After that, the screen shown at left will appear where the current settings are displayed.
1 | POWER SAVE | Places the wireless module |
|
| in the energy saving mode. |
2 | WEP | Enables or disables the WEP |
|
| (Wired Equivalent Privacy). |
3 | AUTHENTICATE | Sets the authentication sys- |
|
| tem when the WEP is en- |
|
| abled. |
Select a desired item by using the numerical keys
or 
and 
keys. Then select a desired setting
by using the 
and 
keys.
For details about the RF parameters, refer to Sub- section 3.1.2.
Pressing the ENT or C key will display the confirmation message as shown at left.
To save the new entry, choose "1:Yes" and press the ENT key. The "** Now Setting **" will appear and the screen will return to the RF parameter menu.
To cancel the new entry, choose "2:No" and press the ENT key. The newly entered data will be
discarded and the screen will return to the RF parameter menu.
When the "** Now Setting **" is displayed, the new entry will be written onto the EEPROM of the wireless module built in the
While this message is displayed, do not turn the BHT off. Writing halfway onto the EEPROM will not bring any assured settings.
101
