Denso BHT-7500S, BHT-7500W user manual Setting the communications environments

[4.5] Setting the communications environments

After the BHT is initialized, the interface port and communications parameters are set as listed in the default table below. Do not access them unless necessary.

Interface port	Optical (Optical interface port)
Communications protocol	BHT-protocol
Communications parameters		Defaults
for the optical interface port
TRANSMIT SPEED	9600 bps
PROTOCOL	SERIAL No.:	ON (Adds serial numbers
(Protocol options)		to data blocks.)
	H. PARITY:	ON (Adds a horizontal
		parity.)
	LINKUP TIME:	30 seconds
	FIELD SPACE:	Ignore

Listed below are the default communications parameters for the direct-connect inter- face.

Communications parameters for the direct-connect interface port

TRANSMIT SPEED

PARITY BIT (Vertical parity)

DATA BIT (Character length)

STOP BIT

PROTOCOL (Protocol options)

	Defaults
19200 bps
None
8 bits
1 bit
SERIAL No.:	ON (Adds serial numbers
	to data blocks.)
H. PARITY:	ON (Adds a horizontal
	parity.)
LINKUP TIME:	30 seconds
FIELD SPACE:	Ignore

60