Denso BHT-7500W, BHT-7500S user manual Set Id

SET ID￿

￿

￿

￿

00001 >> _

SET ID￿

￿

￿

￿

00001 >> 65535_

Chapter 2. Getting Started the BHT and System Mode

Selecting the "2:BHT-Ir Protocol" on the PROTO- COL TYPE screen calls up the screen shown at left.

Enter the ID number of the BHT by using the nu- merical keys, and then press the ENT key. If you do not need to modify the current setting, press the ENT key only.

An ID number should be five-digit decimal character string. The entry range is from 00001 to 65535. If the entry value is less than five digits, the ENT key will be deacti- vated.

If you make a wrong entry, press the BS key ( SF

+C keys) to delete it and then enter the correct data.

To return to the SET COMMUNICATION menu, press the C key.

67