Chapter 2. Getting Started the BHT and System Mode
[4.1] Setting an execution program
SET EXECUTE PROGRAM
EASYPACK.PD3
SAMPLE1.PD3
SAMPLE2.PD3
SAMPLE3.PD3
SAMPLE4.PD3
SET EXECUTE PROGRAM
******************
*NO FILE EXISTS *
******************
Selecting "1: EXECUTE PROGRAM" on the SET SYSTEM menu calls up the screen shown at left.
Highlighted is the current setting.
Use the 
and 
keys to move the cursor to a desired execution program to be run when the power is applied, and then press the ENT key.
To return to the SET SYSTEM menu, press the C key.
If no program files are stored in the memories, the screen shown at left will appear.
To return to the SET SYSTEM menu, press the C key.
55
