[8.1.1] ID entry screen
|
| SET ID |
|
| |
|
|
|
|
| |
| 1:CLIENT NAME |
| ] | ||
| [ |
| |||
| 2:SSID |
|
| ||
|
| tsunami |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| SET ID |
|
| |
|
|
|
|
|
1:CLIENT NAME | ] | |||
[ |
| |||
2:SSID |
|
| ||
| tsunami |
|
| |
|
|
|
|
|
Set up?
1:Yes 2:No
BHT-7500W
Selecting the "1:ID" on the RF parameter menu displays the "** Now Loading **." After that, the screen shown at left will appear where the current settings are displayed.
1 | CLIENT NAME | Sets a client name that is the |
|
| BHT name to be used on the |
|
| network. |
2 | SSID | Sets a service set ID to be used |
|
| on the RF communications net- |
|
| work. |
Select a desired item by using the numerical keys
or 
and 
keys, and then press the ENT key. The screen enters the alphanumeric entry mode in which a cursor appears.
Make the desired settings with the numerical keys and period (.) key. To switch the entry mode be- tween the numeric mode (without guidance) and alphabet mode, press the SF key. After comple- tion of settings, press the ENT key.
In the entry mode, to delete a single character, press the BS key ( SF + C keys). To delete the whole entry you made, press the C key.
For details about the client name and service set ID, refer to Subsection 3.1.2.
Pressing the ENT or C key when any item is highlighted will display the confirmation message as shown at left.
To save the new entry, choose "1:Yes" and press the ENT key. The "** Now Setting **" will appear
and the screen will return to the RF parameter menu.
To cancel the new entry, choose "2:No" and press the ENT key. The newly entered data will be
discarded and the screen will return to the RF parameter menu.
When the "** Now Setting **" is displayed, the new entry will be written onto the EEPROM of the wireless module built in the
While this message is displayed, do not turn the BHT off. Writing halfway onto the EEPROM will not bring any assured settings.
100
