Denso BHT-7500S, BHT-7500W user manual Key entry & beeper test

[5.7] Key entry & beeper test

TEST KEY & BEEPER￿ ￿ & VIBRATION

Selecting "7:KEY & VIBRATION" on the TEST menu calls up the screen shown at left and makes the BHT ready for entry from the keypad.

Pressing individual keys displays the identifier let- ters in the positions pre-assigned to those keys on the LCD as well as sounding the beeper or running the vibrator. (As long as the individual key is held down, the BHT continues beeping or vibrating.)

Pressing the same key again erases the displayed letter.

The table below shows the relationship between the keys, the identifier letters to be displayed on the LCD, and the frequencies (Hz) of the beeper.

Key	Letter	Beeper (Hz)	Key	Letter	Beeper (Hz)	Key	Letter	Beeper (Hz)
C	I	174	M3	T	(Note)	0	0	1567
ALP	J	195	M4	U	(Note)	.	.	1760
SF	K	220	7	7	659	ENT	=	1975
	L	246	8	8	698	F1	A	2093
	M	261	9	9	783	F2	B	2349
	N	293	4	4	880	F3	C	2637
	O	329	5	5	987	F4	D	2793
M1	P	349	6	6	1046	F5	E	3135
F9	Q	391	1	1	1174	F6	F	3520
F10	R	440	2	2	1318	F7	G	3951
M2	S	493	3	3	1396	F8	H	4186

(Note) Only when the M3 (left-hand trigger switch) or switch) is pressed, the vibrator works.

M4

key (right-hand trigger

TEST KEY & BEEPER

& VIBRATION

IJKLMNO

PQRSTU

7894561230.=

ABCDEFGH

After all keys are pressed and displayed on the LCD, this test automatically ends and the screen returns to the TEST menu.

To stop this test, turn the power off.

84