(1)Communications parameters setting screen
SET PARAMETER
< OPTICAL >
1:TRANSMIT SPEED:
2400 9600 19200
38400 57600 115200
Selecting "1:PARAMETER" on the SET OPTICAL screen calls up the screen shown at left.
Highlighted is the current setting.
Select the desired transmission speed by using
the numerical keys or 
and 
keys, and then press the ENT key.
To return to the SET OPTICAL screen, press the C key.
(2)Communications protocol option screen
SET PROTOCOL
< OPTICAL >
1:SERIAL No. : ON OFF
2:H.PARITY : ON OFF
3:LINKUP TIME:
None 30 60 90 120
4:FIELD SPACE:
Ignore Data
Selecting "2: PROTOCOL" on the SET OPTICAL screen calls up the screen shown at left.
Highlighted is the current setting.
1 | SERIAL No.: | Selects whether or not the |
|
| system will add serial num- |
|
| bers to data blocks. |
2 | H. PARITY: | Selects whether or not the |
|
| system will add a horizontal |
|
| parity. |
3 LINKUP TIME: Selects the timeout length (in seconds) to be applied when a link is to be established.
4 FIELD SPACE: Selects whether space codes in the tail of a data field will be ignored or handled as data.
Select a desired item by using the numerical keys
or 
and 
keys. Then select a desired setting
by using the 
and 
keys.
To return to the SET OPTICAL screen, press the C key.
If the
62
