Appendices

Phase 2 with a sequence of DLE EOT and IDs

If the sending station receives a sequence of DLE EOT and IDs anytime during phase 2, it shifts to phase 3 to terminate the message transmission abnormally. Even if phase 3 terminates normally, the transmission results in an abnormal end.

Sending station

Receiving station

DLE EOT and IDs

Occurrence of an error

To phase 3.

Phase 2 with iterated transmission of DLE ENQ and IDs due to no response or invalid response

If the sending station receives no response or any invalid response from the receiving station in response to a transmission block sent, it iterates sending of a sequence of DLE ENQ and IDs at 0.5-second intervals up to 59 times.

If the sending station receives a sequence of DLE ACK and IDs before sending the sequence of DLE ENQ and IDs 59 times, it continues the subsequent message transmission.

Sending station

0.5second

0.5second

Data text m

DLE ENQ and IDs

DLE ENQ and IDs

Receiving station

DLE ACK and IDs

Data text m+1

191

Page 211
Image 211
Denso BHT-7500W, BHT-7500S user manual Phase 2 with a sequence of DLE EOT and IDs