UPLOAD FILE
SAMPLE01.PD3
** Completed **
Chapter 2. Getting Started the BHT and System Mode
Upon completion of uploading, the number of sent records becomes equal to the total number of records and the beeper beeps once. Press the C key to return to the UPLOAD menu.
If you have selected "2:ALL FILES" or
If an error occurs during uploading
If some error occurs during uploading, one of the following screens will appear and the beeper beeps three times.
To retry the uploading operation, press the 2 and ENT keys.
1
and
ENT
keys; to abort it, press the
UPLOAD FILE
XXXXXXXX.XXX
File error!!
Upload?
1:Yes 2:No
■Problem
The file you attempted to upload is damaged.
■Solution
To upload the damaged file as is, press the 1 key.
UPLOAD FILE
XXXXXXXX.XXX
Communication error!!
Retry?
1:Yes 2:No
■Problem
Uploading has failed.
■Solution
To retry uploading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key. Check the interface port, communications param- eters, and communications protocol type in the SET SYSTEM menu or perform the communica- tions test in the TEST menu. (Refer to Subsection 2.5.3, [4.5] and [5.5].)
It is also necessary to check the communications parameters setup of the host computer.
53
