HP 5961-0509 manual WU, Pen Width Unit Selection, Possible Error Conditions

Table 22-25

Related Commands	Group
LA, Line Attributes	The Line and Fill Attributes Group
LT, Line Type

Table 22-26 POSSIBLE ERROR CONDITIONS:

Condition	Printer Response
sum of gap parameters equals zero	ignores command
a gap is negative	ignores command
index = 0 orindex> 8	ignores command

WU, Pen Width Unit Selection

This command specifies how the width parameter of the Pen Width (PW) command is interpreted (whether metric or relative units).

WU type[;]

or

WU [;]

Parameter	Format	Functional Range	Default
type	clamped integer	0 to 1	0 (metric)

Since using WU, with or without parameters, defaults all pen widths, send the WU command before a PW command (which sets a new pen width).

zNo Parameters — Defaults type parameter to 0 (metric) and all pen widths to 0.35 mm.

22-46The Line and Fill Attributes Group EN