HP 5961-0509 manual Vertical Cursor Positioning Decipoints Command, ? & a #

Vertical Cursor Positioning (Decipoints) Command

This Vertical Cursor Positioning command moves the cursor to a new position along the vertical axis.

?& a # V

		#	= Number of Decipoints (1/720 inch)
	Default	=	NA
	Range	=	–32767 to 32767 (rounded to the first decimal place)
	A value field (#) with a plus sign (+) indicates the new position is
	downward from and relative to the current cursor position; a minus
	sign (–) indicates the new position is upward from and relative to the
	current cursor position. No sign indicates an absolute distance from
	the top margin. The top position, defined by the top margin, is 0 and
	the bottom position is determined by the bottom of the logical page.
Note	Since the top margin can be changed using a printer command, the
	physical location of the point (0,0) may change. This affects the cursor
	position on the page.

If a request is made for a location outside the printer’s logical page, the current active position (CAP) is moved to the appropriate logical page limit.

EN Vertical Cursor Positioning (Decipoints) Command 6-11