HP 5961-0509 manual Entity Status Request Example, Example PCL Operation Command Comments, Pcl

A basic entity status request is shown in the example below. This example identifies a status request for downloaded permanent fonts. The example also includes a status readback response at the bottom. Note that this example shows only one possible request/response; for more detailed information, refer to the status readback command descriptions provided later in this chapter.

Table 16-2 Entity Status Request Example

	Example PCL
Operation	Command		Comments
Set location type	E	*s4T	This Set Location Type
	C		command sets the location
			type to “downloaded.”
Set location unit	E	*s2U	This Set Location Unit
	C		command sets the location
			unit to “permanent.”
Identify entity	E	*s0I	The Inquire Status Readback
which initiates	C		Entity command selects status
status readback			for “fonts” and causes the
(Inquire Entity)			printer to buffer the response.

Table 16-3

Printer	PCL	Two permanent
status	INFO FONTS	downloaded fonts
res-		exist in the printer:
ponse	SELECT=“<Esc>(8U<Esc>(s1p__v0s0b4120T <Esc>(7X”	University Roman
	SELECT=“<Esc>(10U<Esc> __v0s0b4157T<Esc>(21X”	(4120T) and Dom
		Casual (4157T).

In addition to the normal status responses, if an invalid request is made, the printer returns an error response. Error responses are described under the Inquire Status Readback Entity command, later in this chapter.

16-4Status Readback EN