HP 5961-0509 Simplex/Duplex Print Command, Be a concern if available user memory is critical

Simplex/Duplex Print Command

This command designates either simplex or duplex printing mode for duplex printers. Simplex mode prints an image on only one side of a sheet (page). Duplex mode prints images on both sides of a sheet.

?& l # S

		#	= 0 - Simplex
			1 - Duplex, Long-Edge Binding
			2 - Duplex, Short-Edge Binding
	Default	=	0
	Range	=	0-2 (Other values ignored)
	Long-Edge bound duplexed pages are bound along the length of the
	physical page (see Figure 4-2). Short-edge bound duplexed pages
	are bound along the width of the physical page (see Figure 4-3).
	Selecting long-edge binding usually results in font rotation. This may
	be a concern if available user memory is critical.
Note	If this command is received by a printer which does not contain the
	duplex feature, it is ignored. Printers which do not contain the duplex
	feature print in simplex mode (front side of sheet) only.

EN Simplex/Duplex Print Command 4-5