HP 5961-0509 manual Push/Pop Cursor Position Command, ? & f # S

Push/Pop Cursor Position Command

The Push/Pop Cursor Position command allows the current cursor position to be stored and recalled.

?& f # S

#= 0 - Push (Store cursor position) 1 - Pop (Recall a cursor position)

Default = 0

Range = 0, 1 (Values outside range are ignored)

A value field of 0 pushes the cursor position onto the stack, leaving the current position unaffected. A value field of 1 pops the position from the stack, restoring it as the current cursor position.

Note The last item pushed is the first item popped.

Twenty positions may be pushed. If you try to save more than

20 positions, the command is ignored. If you try to restore more positions than were pushed, the command is ignored. A printer reset restores the current active position stack to the top (all saved positions are discarded).

The positions stored in the stack are not changed with an orientation change. Therefore, the positions are relative to the top left corner of the current orientation. Also, a position pushed in one orientation and popped in another can result in a position that is outside the logical page. If the position popped is outside the current logical page, the position is moved to the appropriate logical page limit.

EN Push/Pop Cursor Position Command 6-15