HP 5961-0509 Typeface Family Command, Comparison Guide for typeface values, 18PCL Font Selection

Typeface Family Command

The Typeface Family command designates the design of the font.

	E	C ( s # T - Primary typeface family
	E	C ) s # T - Secondary typeface family
	#	= Typeface family value (see Appendix C in the PCL 5
		Comparison Guide for typeface values).
Default	=	14099, Body Text
Range	=	10 - 65535 (values greater than 65535 are set to 65535)

If the value field (#) specifies a typeface that is unavailable, this characteristic is ignored during font selection.

The factory default primary and secondary typefaces are Courier.

The user default primary and secondary typefaces are implicitly set by selection of a user default font from the printer’s control panel (refer to the printer User’s Manual).

There is some variation in how font selection occurs between HP LaserJet models. The typeface selection compatibility for two types of values is identified for various HP LaserJet printers in Chapter 2 of the PCL 5 Comparison Guide.

Note	Use the typeface family values, listed in Appendix C in the PCL 5
	Comparison Guide, for future typeface selection.

1.These values are not applicable to all HP LaserJet family printers. See the PCL 5 Comparison Guide for specifics.

8-18PCL Font Selection EN