HP 5961-0509 manual Troubleshooting Commands, End-of-Line Wrap, Display Functions Mode

Troubleshooting Commands

End-of-Line Wrap

The End-of-Line Wrap command defines the action that occurs when a line of text reaches the right margin.

EC & s # C

#=0 - Enables End-of-Line Wrap 1 - Disables End-of-Line Wrap

When end-of-line wrap is enabled, a character or space that moves the cursor to the right of the right margin executes a CR-LF (prior to the printing of the character or space).

When end-of-line wrap is disabled, a character or space that would move the cursor to the right of the right margin may be clipped (refer to Chapter 2). When a character is clipped, the cursor is set to the right margin.

The primary use of this command is with display functions mode.

The factory default is end-of-line wrap disabled.

Example

To enable end-of-line wrap mode, send:

EC&s0C

Display Functions Mode

The Display Functions Mode command allows all escape sequences and control codes to be printed instead of being executed.

EC Y - Enables Display Functions Mode

EC Z - Disables Display Functions Mode

24-12Programming Hints EN