HP 5961-0509 manual SV, Screened Vectors, WU, Pen Width Unit Selection TR, Transparency Mode

Table 22-20

Related Commands	Group
PW, Pen Width	The Line and Fill Attributes Group
WU, Pen Width Unit Selection
TR, Transparency Mode

SV, Screened Vectors

This command selects the type of screening (area fill) to be applied to vectors. Options include lines, hatching patterns (fill types 3 and 4), arcs, circles, edges of polygons, rectangles, wedges and PCL user-defined patterns. SV does not affect solid fill types, stroked characters, or edges of characters.

SV [screen_type [,option1 [,option2]]][;]

or

SV [;]

Parameter	Format	Functional Range	Default
screen_type	clamped	0, 1, 2, 21, 22	No screening (solid)
	integer
option1, option2	clamped	type dependent*	type dependent
	integer

* Refer to the table following the parameter descriptions.

There are four types of screen fill: shaded fill, HP-GL/2 user-defined raster fill, predefined PCL cross-hatch patterns, and PCL user-defined patterns.

zNo Parameters— Defaults to no screening (solid fill--same as SV0;).

EN SV, Screened Vectors 22-39