HP 5961-0509 manual Raster Graphics Example, Example of Raster Graphic Image Data, Command Data

Raster Graphics Example

To transfer an unencoded raster graphic image (see Figure 15-11) in the shape of an arrow, perform the following steps:

Table 15-10

1. Position the cursor:

EC*p300x400 This moves the cursor to PCL Unit position

Y(300, 400) within the PCL coordinate system.

2. Specify the raster graphics resolution:

EC*t75R	This sets the raster graphics resolution to
	75 dots-per-inch.

3. Specify the raster graphics presentation method:

EC*r0F	This specifies that the raster graphics is
	printed in the orientation of the logical
	page.
4. Specify the left raster graphics margin:
EC*r1A	This sets the left graphics margin to the
	current X position (300).

5. Transfer the raster data to the printer:

Divide the image into dot rows and transfer each dot row to the printer as a string of bytes, as illustrated on the following page.

6. Signify the end of the raster graphic image transfer:

EC*rC	This example prints the arrow as shown in
	Figure 15-11.

Table 15-11 Example of Raster Graphic Image Data
		Raster Image Data			Command Data
Dot
Row	byte 1	byte 2	byte 3	byte 4	Decimal Equivalent
1	00000000	00000000	10000000	00000000	EC*b4W[	0,	0,128,	0]
2	00000000	00000000	11000000	00000000	EC*b4W[	0,	0,192,	0]
3	00000000	00000000	11100000	00000000	EC*b4W[	0,	0,224,	0]
4	00000000	00000000	11110000	00000000	EC*b4W[	0,	0,240,	0]
5	00000000	00000000	11111000	00000000	EC*b4W[	0,	0,248,	0]

EN Raster Graphics Example 15-31