HP 5961-0509 manual 23-52The Character Group

Table 23-26 Example: Using the ES Command (continued)

PA2500,3200;	Specify absolute plotting and move to
SI.187,.269;	(2500,3200); specify a relative character
	size of .187 cm wide by .269 cm high.
DT#;ES;	Define the “#” character as the label
	terminator and set the extra space setting
	to default (no extra space).
LBES; CAUSES#;	Print “ES; CAUSES”.
CP;LBTHIS	Send a CP command as a CR-LF and print
SPACING.#;	“THIS SPACING.”
PA2500,2500;	Move to (2500,2500).
ES-.1,-.25;	Decrease the inter-character spacing by .1
LBES-.1,-.25;	and the inter-line spacing by .25; print
CAUSES#;	“ES-.1,-.25; CAUSES”.
CP;LBTHIS	Send CP in place of CR-LF and print “THIS
SPACING.#;	SPACING.”
PA2500,1800;	Move to (2500,1800).
ES.2,.25;LBES.2,.25;	Increase the inter-character spacing by .2
CAUSES#;	and the inter-line spacing by .25 of the
	Space control code; print “ES.2,.25;
	CAUSES”.
CP;LBTHIS	Send CP in place of CR-LF and print “THIS
SPACING.#;	SPACING.”
EC%0A	Enter the PCL mode.
ECE	Send a reset to end the job and eject the
	page.

23-52The Character Group EN