HP 5961-0509 Horizontal Cursor Positioning PCL Units Command, ? * p #, = Number of PCL Units

Horizontal Cursor Positioning (PCL Units) Command

This Horizontal Cursor Positioning command moves the cursor to a new position along the horizontal axis.

?* p # X

		#	= Number of PCL Units
	Default	=	NA
	Range	=	0 - logical page right bound
	A value field (#) with a plus sign (+) indicates the new position is to
	the right of and relative to the current cursor position; a minus sign (–)
	indicates the new position is to the left of and relative to the current
	cursor position. No sign indicates an absolute distance which is
	referenced from the left edge of the logical page. The left most
	position is 0 and the right most position is the right bound of the
	logical page.
	If a request is made for a location outside the printer’s logical page,
	the current active position (CAP) is moved to the appropriate logical
	page limit.
Note	The current unit size used in PCL Unit moves is determined by the
	value specified in the Unit of Measure command. If no other value is

specified, the number of units-per-inch for PCL Unit moves is one unit equals 1/300 inch.

EN Horizontal Cursor Positioning (PCL Units) Command 6-7