HP 5961-0509 manual IN, Initialize, Related commands

Table 19-7 Default Conditions (continued)

Transparency Mode	TR1	Transparency mode on.
Transparent Data	TD	Normal printing mode.
User-Defined Line	UL	Defaults all 8 line types.
Type

In addition, the printer updates the Carriage Return point for labeling to the current pen location. (See Chapter 23, The Character Group, for more information on the Carriage Return point.)

The DF command does not affect the following HP-GL/2 conditions.

zLocations of P1 and P2.

zCurrent pen, its location, width, width unit selection, and up/down

zposition.

zHP-GL/2 drawing rotation.

Table 19-8 Related commands

Related Commands	Group
IN, Initialize	The Configuration/Status Group

IN, Initialize

	This command resets all programmable HP-GL/2 functions to their
	default settings. Use the IN command to return the printer to a known
	HP-GL/2 state and to cancel settings that may have been changed by
	a previous command sequence. (The ECE Reset issues an automatic
	IN command.)
	IN [;]
Notes	In this manual, all command sequence examples begin with IN to
	clear unwanted conditions from the previous command sequence,
	even though an ECE command automatically executes an IN
	command.
	Once HP-GL/2 mode is entered and commands are issued, the
	HP-GL/2 conditions are no longer initialized. To place HP-GL/2
	into the default state, send the IN command.

EN IN, Initialize 19-21