HP 5961-0509 HP-GL/2 Picture Frame, Used. The default HP-GL/2 picture frame is the current top

HP-GL/2 Picture Frame

In addition to text and raster graphics, HP-GL/2 vector graphics can be placed on the PCL logical page. HP-GL/2 vector graphics are incorporated using the concept of the HP-GL/2 picture frame (see Figure 2-3). Within this picture frame, HP-GL/2 uses its own coordinate system and units of measure. The HP-GL/2 coordinate system and units are described in detail in Chapter 17, An Introduction to HP-GL/2 Vector Graphics, and Chapter 18, The Picture Frame.

Note	If no HP-GL/2 picture frame size is specified (using the commands
	described in Chapter 18), then the default HP-GL/2 picture frame is
	used. The default HP-GL/2 picture frame is the current top and
	bottom margins and the left and right edges of the logical page. The
	HP-GL/2 picture frame rotates with the PCL page orientation, but is
	not affected by the PCL print direction.

Figure 2-3 PCL Logical Page with HP-GL/2 Picture Frame

2-6The Page EN