HP 5961-0509 FT, Fill Type PW, Pen Width RF, Raster Fill Definition, Possible Error Conditions

For Type 22, the optional parameter selects the corresponding PCL user-defined pattern specified by way of the ?*c#W command. Option1 specifies the pattern associated with the user-defined fill pattern. Option2 is ignored if present. See “User-Defined Pattern Graphics” in Chapter 13 for a discussion of PCL user-defined patterns.

All parameters are optional. If all parameters are omitted, screening is turned off (the vectors are solid).

If screen_type is present, but option1 and/or option2 are omitted, values previously specified for the specified screen_type are used. If none have been specified since the last power-on, IN, DF, or ?E Reset, the defaults are assumed.

All screening patterns use the current anchor corner (see the AC command description).

Table 22-22

Related Commands	Group
AC, Anchor Corner	The Line and Fill Attributes Group
FT, Fill Type
PW, Pen Width
RF, Raster Fill Definition
WU, Pen Width Unit Selection

Table 22-23 POSSIBLE ERROR CONDITIONS:

Condition	Printer Response
1 or more parameters	ignores parameter

EN SV, Screened Vectors 22-41