User instructions, E7 E8 E9, Fault, Description | Smeg DI612A1

Image 35

Smeg DI612A1 User instructions, E7 E8 E9, Fault, Description, Turbine flow-regulator malfunction, Light off, Light on

Contents

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents NEVER BE REMOVED Safety instructions1. Safety and operating instructions USES OTHER THAN THOSE DESCRIBED ABOVE THIS DISHWASHER MUST BE USED BY ADULTS APPLIANCE AQUASTOP MODELS For free-standing models only Installation instructions2. Installation and hook-up DRAIN CONNECTION CONNECTING TO THE WATER SUPPLY2.1 Water supply connection IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD 2.2 Electrical connection and precautionsNEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD FOR GREAT BRITAIN ONLY Fuse replacement 3.1 Upper panel User instructions3. Description of the controls SELECTED PROGRAM INDICATOR LIGHTS HALF LOAD BUTTON 13 INFORMATION DISPLAY SETTING THE WASHING PROGRAM AND SWITCHING ON“3/1” OPTION BUTTON “3/1” OPTION LIGHT Only run the soak program with half loads Very dirty pans QUICK TIME available in all programs except the soak program 3.2 Washing programsBefore starting a washing program make sure that The correct amount of detergent has been added to the dispenser TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT CANCELLING THE CURRENT PROGRAMDELAYED START available in all programs except the soak program CHANGING THE PROGRAM REMOVING THE DISHES TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENTEND OF CYCLE 4.1 Using the water softening system 4. Operating instructions ADJUSTING THE WATER SOFTENING SYSTEM WATER HARDNESS TABLE 4.2 Using the rinse aid and detergent dispensers ADDING THE RINSE AID ADJUSTING THE RINSE AID DISPENSER SETTING During the washing cycle, the dispenser will be opened automatically ADDING THE DETERGENT User instructions MAKE SURE that the items being washed are dishwasher-safe 4.3 General warnings and recommendationsCorrect loading of the dishes helps ensure optimal washing results Dishes and objects in copper, tin, zinc or brass these tend to stain Items which are not dishwasher-safe LOADING THE LOWER BASKET 4.4 Using the basketsLOWER BASKET UPPER BASKET CUTLERY BASKET Loading examples Models with cutlery racks LOADING THE UPPER BASKET Version B ADJUSTING THE UPPER BASKET User instructions 5.1 General warnings and recommendations 5. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER CLEANING THE SPRAY ARMS Fill the rinse aid dispenser Shut off the water supply tap CLEANING THE FILTER UNITGENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE PROLONGED DISUSE Reconnect the water intake hose and open the tap again TROUBLESHOOTING MINOR PROBLEMSIf the dishes are not being cleaned properly, check that BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE If there are visible traces of rust inside the tank If the dishes fail to dry or remain dull, check thatIf the dishes show signs of streaking, staining, etc., check that E1 E2 E3 E4 E5 E6 6. TroubleshootingFAULT Safety level Water intake system malfunction E7 E8 E9Turbine flow-regulator malfunction Alternate washing system malfunction Width Depth Height depending on models Capacity Water supply pressure TECHNICAL DATAElectrical characteristics