HP 5961-0509 manual Affected Commands Group, Df, Ro, Ip, Pd, Pu, Wu, Pw

The IN command sets the printer to the same conditions as the DF command, plus the following:

zRaises the pen (PU).

zReturns the pen location to the lower-left corner of the PCL Picture Frame (PA0,0).

zCancels drawing rotation (RO).

zSets P1 and P2 to the lower-left and upper-right corners, respectively, of the PCL Picture Frame (IP).

zSets pen width mode to metric; units are millimeters (WU).

zSets the pen width to 0.35 mm (PW).

zSets number of pens to 2 (black [1] and white [0]).

Table 19-9

Affected Commands	Group
DF, RO, IP	Configuration/Status Group
PD, PU,	Vector Group
WU, PW	Line and Fill Attributes Group

Table 19-10

Related Commands	Group
DF, Default Values	Configuration/Status Group

19-22The Configuration and Status Group EN