HP 5961-0509 manual LTCI5, 20-28The Vector Group

Table 20-17 Example: Drawing Circles with Different Radii and Line Types

ECE	Reset the printer.
EC%ØB	Enter HP-GL/2 mode.
IN;	Initialize HP-GL/2 mode.
SP1;	Select pen number 1 (black).
SC-75,75,-75,75,1;	Set up user scaling with (-75,-75) as P1 and
	(75,75) as P2; the "1" parameter specifies
	isotropic scaling.
PA0,0;	Specify absolute plotting and move to
	user-unit location (0,0).
LT;CI5;	Specify a default line type (solid) and draw a
	circle with a radius of 5 user-units.
LT0;CI-12;	Select line type 0 (dotted) and draw a circle
	with a radius of 12 user-units (the minus
	sign indicates starting at the 180° point).
LT1;CI19;LT2; CI-26;	Select line type 1 and draw a circle with a
	radius of 19 user-units. Then select line
	type 2 and draw a circle with a radius of
	26 user-units.
LT3;CI33;LT4; CI-40;	Select line type 3, draw a circle with a
	radius of 33 user-units. Then select line
	type 4 and draw a circle with radius of
	40 user-units.
LT5;CI47;LT6;CI54;	Draw the outer two circles; the first with a
	line type of 5 and a radius of 47 user-units;
	the second with a line type of 6 and a radius
	of 54 user-units.
EC%ØA	Enter the PCL mode.
ECE	Send a reset to end the job and eject the
	page.

20-28The Vector Group EN