HP 5961-0509 manual Set Pattern Reference Point Command, 13-22The PCL Print Model

Set Pattern Reference Point Command

The Set Pattern Reference Point command causes the printer to tile patterns with respect to the current cursor position. This command also specifies whether the pattern rotates with the print direction or remains fixed.

		EC * p # R
		# =0 - Rotate patterns with print direction
		1 - Keep patterns fixed
	Default	= 0
	Range	= 0,1 (values outside the range are ignored)
	A value field of 0 rotates the patterns with changes in the print
	direction (see Print Direction command). For a value field of 1,
	patterns remain fixed for changes in print direction.
	The default pattern reference point is the upper left corner of the
	logical page at the top margin (position 0,0). If the Set Pattern
	Reference Point command is not set, the pattern is tiled with
	respect to the default reference point.
Notes	All patterns are rotated for changes in orientation (refer to “Logical
	Page Orientation Command” in Chapter 5 of this manual).

This command applies to user-defined, shading, and cross-hatch patterns.

13-22The PCL Print Model EN