HP 5961-0509 manual Pattern Transparency Mode Command

Pattern Transparency Mode Command

The Pattern Transparency Mode command sets the pattern’s transparency mode to transparent or opaque.

EC * v # O

#=0 - Transparent 1 - Opaque

Default	=	0
Range	=	0, 1 (other values cause the command to be ignored)

A transparency mode of “0” (transparent) means that the white regions of the pattern image are not copied onto the destination. A transparency mode of “1” (opaque) means that the white pixels in the pattern are applied directly onto the destination.

Note	When printing white rules, the pattern transparency is treated as if it
	were “opaque”; white rules erase black rules regardless of the
	transparency mode.
	Refer to the preceding definitions and the discussion of Figure 13-3
	and Figure 14-3 for an explanation of the effects of transparency.

EN Pattern Transparency Mode Command 13-7