HP 5961-0509 manual Number of Copies Command, Example, ? & l #, ?&l3X, 4PCL Job Control Commands

Number of Copies Command

The Number of Copies command designates the number of printed copies of each page.

?& l # X

#= Number of copies (1 to 32767 maximum)

Default = 1 (Configurable from control panel)

Range = 1-32767

(Values 32767 execute as 32767 values 1 are ignored. Maximum number of copies=99 for LaserJet II, IIP, III, IIID, IIIP and earlier LaserJet printers.)

This command can be received anywhere within a page and affects the current page as well as subsequent pages.

Example

To print 3 copies of a page, send:

?&l3X

	Figure 4-1 Number of Copies
Note	The HP-GL/2 Replot (RP) command is inactive for PCL 5 printers;
	use the Number of Copies command for multiple HP-GL/2 plots. To
	be effective, the Number of Copies command must be issued from
	PCL prior to closing the page on which the plot is defined.

4-4PCL Job Control Commands EN