HP 5961-0509 manual Line and Fill Attributes Group, Line and Fill Attribute Commands

22 The Line and Fill Attributes Group

Introduction

The information in this chapter enables you to achieve the following results in your HP-GL/2 applications:

zEnhance your drawings with various line types.

zEnhance your drawings with different fill types.

zPosition fill type patterns.

The following commands are described in this chapter:

Table 22-1 The Line and Fill Attribute Commands

Command	Summary
AC, Anchor Corner	Specifies the starting point for
	fill patterns.
FT, Fill Type	Selects the pattern to use
	when filling polygons.
LA, Line Attributes	Specifies how line ends and
	joins are shaped.
LT, Line Type	Selects the line pattern to use
	for drawing lines.
PW, Pen Width	Specifies a new pen width.
RF, Raster Fill Definition	Defines a pattern for use as
	area fill.
SM, Symbol Mode	Draws a symbol at each
	coordinate location.
SP, Select Pen	Selects a pen for plotting.

EN Introduction 22-1