HP 5961-0509 manual PW, Pen Width

zType — Specifies how the width parameter of the Pen Width (PW) command is interpreted.

•0 — Metric. Interprets the pen width parameter in millimeters. Specifying type 0 defaults all pen widths to 0.35mm.

•1 — Relative. Interprets the pen width parameter as a percentage of the diagonal distance between P1 and P2. Specifying type 1 defaults all pen widths to 0.1% of the diagonal distance from P1 to P2.

If the specified type parameter is not 0 or 1, the printer ignores the command.

A WU command remains in effect until another WU command is executed, or the printer is initialized. WU is not defaulted by the Default Values (DF) command.

Table 22-27

Related Commands	Group
PW, Pen Width	The Line and Fill Attributes Group
SP, Select Pen

EN WU, Pen Width Unit Selection 22-47