HP 5961-0509 manual PU650,450 PD1000,450, Pen down, and draw a line to, PU3300,800 PD3500,800

Table 20-10 Example: Using the AT Command (continued)

PU650,450; PD1000,450;	Lift the pen, move to (650,450), place
	the pen down, and draw a line to
	(1000,450).
PU1000,100;	Lift the pen, move to (1000,100),
PD1000,1500, 2500,1500;	place the pen down, draw a line to
	(1000,1500), then to (2500,1500).
AT3200,800,2500,100;	Print an arc, starting at current pen
	position (2500,1500), passing
	through (3200,800) and ending at
	(2500,100).
PU3200,900;PD;	Lift the pen, move to (3200,900) and
	set the pen down.
AT3300,800,3200,700;	Print an arc, starting at the current
	pen position, passing through
	(3300,800) and ending at (3200,700).
PU3300,800; PD3500,800;	Lift the pen, move to (3300,800), pen
	down, and draw a line to (3500,800).
EC%ØA	Enter the PCL mode.
ECE	Send a reset to end the job and eject
	the page.

Figure 20-12

20-18The Vector Group EN