HP 5961-0509 Using Line Attributes and Types, Wedges, 22-2The Line and Fill Attributes Group

Table 22-1 The Line and Fill Attribute Commands

SV, Screened Vectors	Selects the type of area fill to
	be applied to vectors (lines,
	cross-hatch lines, arcs, circles,
	edges of polygons, rectangles,
	and wedges).
TR, Transparency Mode	Defines how the white areas
	of the source graphics image
	affect the destination graphics
	image.
UL, User-Defined Line Type	Defines a line pattern.
WU, Pen Width Unit Selection	Specifies whether the pen
	width is defined in millimeters
	or as a percentage of the
	P1/P2 distance.

Using Line Attributes and Types

You can change the appearance of the lines you draw by using the Line Attribute (LA) and Line Type (LT) commands. The Line Attribute command lets you specify whether the ends of lines and corners of joined lines should appear as square, triangular, round, or beveled.

Figure 22-1 Line Ends Attribute

Line types are repeated patterns of dots and/or dashes (including solid lines). The following shows some examples of line types. Note that you can also vary the width of the lines and line types you draw by using the Pen Width (PW) command.

22-2The Line and Fill Attributes Group EN