HP 5961-0509 manual Bitmap Fonts, Scalable Fonts, 16-12Status Readback

	As mentioned, variations in the font response occur as a result of
	the font being a bitmap, bound scalable, unbound scalable, soft
	(downloaded) font, or the location type set to 1 (currently selected).
	These variations include slight differences in the information included
	in the “SELECT=” line, with the addition of different keywords
	(“SYMBOLSETS=” “LOCTYPE=” and “LOCUNIT=”). These variations
	are described in detail in the following paragraphs.
Notes	In the status response, an escape character is represented by the five
	characters: “&”.
	Keywords which follow a “SELECT=” keyword apply to the font
	identified by that “SELECT=” keyword.
	Bitmap Fonts
	For bitmap fonts, the “SELECT=” line is returned (which identifies the
	font selection characteristics as described above). For example, the
	printer’s internal, bitmap, Roman-8 Line Printer font would be
	returned as shown below.
	PCL
	INFO FONTS
	SELECT=“<Esc>(8U<Esc>(s0p16.67h8.5v0s0b0T”
	Also see soft font description below.
	Scalable Fonts
	For bound scalable fonts, two underscores, “...s 1 p __ v 0 s...,” in
	the “SELECT=” line indicate that the font is a bound scalable. In
	addition, only the relevant characteristics are listed. Depending on
	whether the font is proportional or fixed spaced, only either height
	or pitch is listed. For example, the printer’s internal scalable Symbol
	font (proportionally spaced) would be returned as shown below.
	PCL
	INFO FONTS
	SELECT=“<Esc>(19M<Esc>(s1p__v0s0b16686T”
	Also see the soft font description below.

16-12Status Readback EN