Seiko 5d88 manual Crown with Driving Wheel, HOW to Charge and Start the Watch, Ones

CROWN WITH DRIVING WHEEL

English	u	Some models may have a crown with a special structure as illustrated
		below. Refer to the following instructions when operating this type of
		crown, as it should be operated in a different way from that of ordinary
		ones.
		Normal position	First click position	Second click position

Crown

B A B A

Driving wheel

To pull out the crown, pull out the A portion (crown).

To turn the crown, turn the B portion (driving wheel).

HOW TO CHARGE AND START THE WATCH

1.Turn the crown clockwise repeatedly to charge the watch.

✽The manual winding mechanism for generating the

electric power functions when the crown is turned clockwise. The watch can also be charged when the crown is turned in a reciprocating motion.

✽ When the watch is completely stopped, the direct drive indicator hand points at scale marking 1 under the 0 position (standby position).

2. After electric power generation by turning the crown continues for a certain period, the direct drive indicator hand moves to point at scale marking 0 and the second hand starts moving. Make sure to stop turning the crown to check it.

✽ If the second hand does not move even though the crown is turned, turn the crown more quickly.

✽ If the watch has been left untouched for several years, the second hand starts moving in 2-second intervals after the crown is turned. This is not a malfunction. Charge the watch by turning the crown until the direct drive indicator hand moves from the standby position to the 0 position. It may take approximately 5 to 6 minutes.

English