Recording from Digital Video Devices (DV Dubbing)
You can record from other digital video devices equipped with a DV terminal with virtually no loss in picture and sound quality.
1.Connect the camcorder to the digital video device.
See Connecting a Digital Video Device (
63).
2.Set the camcorder to 
mode and load a blank cassette.
3.Connected device: Load the recorded cassette or disc.
4.Open the FUNC. menu, select (
) the recording
pause icon 
and press ( 
).
5. Select (
) [EXECUTE] and press ( 
).
In record pause and during recording, you can check the picture on the screen.
6.Connected device: Play back the tape or disc.
7.If the joystick guide does not appear on screen,
press ( 
) to display it.
8. Push the joystick (
) towards 
/
when the scene you wish to record appears.
•Recording starts.
•Push the joystick (
) towards 
/
again to pause/resume the recording.
9.Push the joystick (
) towards 
to stop recording. 10.Connected Device: Stop playback.
Blank sections may be recorded as anomalous picture.
If the picture does not appear, reconnect the DV cable or turn the camcorder off and back on again.
You can only record video signals from devices with the 
logo from recordings in SD (standard definition) standard, in SP or LP recording mode. Note that signals from identically shaped DV (IEEE1394) terminals may be in different video standards.
We recommend powering the camcorder from a household power source.
E
Editing
65
