Playing Back a Tape

If the playback picture is distorted, clean the video heads using a Canon Head Cleaning Cassette or a commercially available digital video head-cleaning cassette ( 72).

1. Set the camcorder to mode.

Set the switch to PLAY.

2.Open the LCD panel.

You can also close the LCD panel with the screen facing out.

3.If the joystick guide does not

appear on screen, press ( ) to display it.

4.Push the joystick () towards to rewind the tape.

5.Push the joystick () towards /

to play back the tape.

Push () again to pause the playback.

6.Push the joystick () towards to stop the playback.

Joystick

To use the viewfinder, close the LCD panel.

About the screen display: During playback, the time code gives the hours, minutes, seconds and frames. The remaining tape time may not appear when the time left is less than 15 seconds.

26

Page 26
Image 26
Canon MV 901 instruction manual Playing Back a Tape, Open the LCD panel, Push the joystick towards to stop the playback