Using a Household Power Source
Connect to a household power source to use the camcorder without worrying about the battery power. You can keep the battery pack attached; the battery power will not be consumed.
E
1. | Turn the | switch to | . |
|
|
2. | Connect the power cord to the |
|
| ||
| power adapter. |
|
|
|
|
3. | Plug the power cord into a power |
|
| ||
| outlet. |
|
|
|
|
4. | Connect the power adapter to the |
|
| ||
| camcorder’s DC IN terminal. |
|
|
| |
| Turn off the camcorder before connecting or disconnecting the power adapter. | Preparations | Basic Functions | ||
| If the adapter is used close to a TV, it may cause picture interference. Move the | ||||
| adapter away from the TV or the antenna cable. | ||||
| Do not connect any products that are not expressly recommended to the | ||||
| camcorder’s DC IN terminal or to the power adapter. | ||||
| You may hear some noise from the power adapter during use. This is not a |
|
| ||
| malfunction. |
|
|
|
|
| Do not disconnect and reconnect the power cord while charging a battery pack. |
|
| ||
| Charging may stop. The battery pack may not be charged correctly even if the |
|
| ||
| CHARGE indicator is continuously on. The battery pack may also not be |
|
| ||
| charged correctly when a power outage occurs during charging. Remove the |
|
| ||
| battery pack and attach it back to the camcorder. |
|
| ||
When the power adapter or the battery pack is defective, the CHARGE indicator flashes rapidly (at about 2 flashes/second) and charging stops.
The CHARGE indicator informs you about the charge status.
More than 50%: Flashes twice every second
100%: Continuously on
We recommend charging the battery pack in temperatures between 10 °C and 30 °C. Outside the temperature range of 0 °C to 40 °C, the charging will not start. If the battery temperature goes outside this temperature range while charging, the CHARGE indicator will start flashing rapidly and the charging will stop.
A lithium ion battery pack can be charged at any charge state. Unlike conventional battery packs, you do not need to completely use or discharge it before charging.
We recommend that you prepare battery packs 2 to 3 times longer than you think you might need.
To conserve battery power, turn off the camcorder instead of leaving it in record pause mode.
11
