HP 5961-0509 manual Example Changing the Size of a Drawing, EC%0B

Table 19-2 Example: Changing the Size of a Drawing

EC%0B	Enter HP-GL/2 mode, using the default
	picture frame size and anchor point.
IN;	Initialize HP-GL/2 mode.
IP0,0,2000,2000;	Set P1 to be (0,0) and P2 to be
	(2000,2000).
SC0,10,0,10;	Set up user-unit scaling to range from
	(0,0) to (10,10).
SP1;	Select pen number 1. Even though there
	is no physical pen, the SP command
	must be used to enable printing.
PA5,5;	Begin absolute plotting from the center of
	the square (5,5).
CI3;	Print a circle with a radius of 3 user-units.
IP2500,500,3500,1500;	Input a new P1 and P2 position for
	printing the smaller circle.
PA5,5;	Begin absolute plotting from the center of
	the new square (5,5).
CI3;	Print the second circle with a radius of
	3 user-units.
EC%0A	Enter PCL Mode.
ECE	Reset the printer to complete the job and
	eject the page.

EN Using Scaling Effectively 19-9