HP 5961-0509 manual HP-GL/2 State Variables

Table 5-1 HP-GL/2 State Variables

?E	z	executes “IN” command
or	z	defaults picture frame
Control Panel Reset:
	z defaults picture frame anchor
		point
	z defaults HP-GL/2 plot size
Changing Orientation	z	Defaults picture frame anchor
or		point.
Sending a Page Size	z	Defaults picture frame.
Command:
	z Defaults HP-GL/2 plot size.
	z Defaults P1 and P2 (“IP;”).
	z Defaults soft-clip window
		(“IW;’”).
	z Clears the polygon buffer
		(“PM0;PM2”).
	z Updates the current position to
		the lower-left corner of the
		picture frame (P1).
Redefinition of the	z	Defaults P1 and P2 (“IP”).
horizontal and/or vertical	z	Defaults soft-clip window (“IW”).
picture frame:
	z Clears the polygon buffer
		(“PM0;PM2”).
	z Updates the current position to
		the lower-left corner of the
		picture frame (P1).
Redefinition of the Picture	z	Defaults P1 and P2 (“IP”).
Frame Anchor Point:	z	Defaults soft-clip window (“IW”).
	z Clears the polygon buffer
		(“PM0;PM2”).
	z Updates the current position to
		the lower-left corner of the
		picture frame (P1).
Specifications of a New	z	Changes the picture frame
HP-GL/2 Plot Size:		scaling factor.

5-6Page Control Commands EN