HP 5961-0509 manual Decipoints=E #H, or PCL Units=E *c#A, 14-2PCL Rectangular Area Fill Graphics

	3	Specify width of rectangle (Horizontal Rectangle Size Command -
		Decipoints=E	*c#H, or PCL Units=E *c#A).
		C	C
	4	Specify height of rectangle (Vertical Rectangle Size Command -
		Decipoints=E	*c#V, or PCL Units=E *c#B).
		C	C
	5	Select specific shade, cross-hatch, or user-defined pattern
		(Pattern ID Command - EC*c#G - Chapter 13)1.
	6	Fill rectangular area with pattern (Fill Rectangular Area
		Command - ECc#P).1 This ends the procedure and prints the
		patterned area.
Note	An area’s width extends in the positive X-direction of the PCL
	coordinate system, and the height extends in the positive Y-direction.

The Pattern Transparency Mode controls how a pattern fills a rectangular area. Pattern Transparency Mode determines what effect transparent or opaque) the white pixels of the pattern have on the rectangular area (refer to “Pattern Transparency Mode Command” in Chapter 13).

1.White (1), black (0) or current (5) pattern also can be specified using this command.

14-2PCL Rectangular Area Fill Graphics EN