HP 5961-0509 manual Understanding HP-GL/2 Syntax, HP-GL/2 Commands by Group 5, SV1, TR1

Table 17-5 The HP-GL/2 Commands by Group (5 of 5)

LINE AND FILL ATTRIBUTES GROUP

AC	Anchor Corner
FT	Fill Type
LA	Line Attributes
LT	Line Type
PW	Pen Width
RF	Raster Fill Definition
SM	Symbol Mode
SP	Select Pen
SV1	Screened Vectors
TR1	Transparency Mode
UL	User-defined Line Type
WU	Pen Width Unit Selection

1. These commands are part of the Palette Extensions to HP-GL/2.

As shown in the tables above, each HP-GL/2 command is a two-letter mnemonic code designed to remind you of its function. For example, IN is the Initialize command, SP is the Select Pen command, and CI is the Circle command. Parameters are used with certain HP-GL/2 commands to tell the printer to complete the command in a particular way.

Understanding HP-GL/2 Syntax

HP-GL/2 commands have four components: a mnemonic, parameter(s), separator(s), and a terminator. Refer to the following illustration of a typical HP-GL/2 command and the description of its components.

17-6An Introduction to HP-GL/2 Vector Graphics EN