HP 5961-0509 manual Start Raster Graphics Command, 15-14Raster Graphics

Figure 15-8 Maximum Raster Width

Start Raster Graphics Command

The Start Raster Graphics command identifies the beginning of the raster data and also specifies the left graphics margin.

EC * r # A

#=0- Start graphics at default left graphics margin X-position 0).

1- Start graphics at current cursor position (current X-position).

Default	=	0
Range	=	0, 1 (values outside the range default to 0)

A value of 0 specifies that the left graphics margin is at the default left margin of the page (X-position 0). A value of 1 specifies that the left graphics margin is at the current X-position. In presentation mode 3, the location of the left graphics margin varies depending on the orientation.

Once a Start Raster Graphics command is received by the printer, raster graphics resolution, raster graphics presentation mode, raster height, raster width, and left raster graphics margin are fixed until an end raster graphics command is received.

15-14Raster Graphics EN