HP 5961-0509 manual Select Current Pattern Command, Pattern E #T and the Pattern ID E

Select Current Pattern Command

The Select Current Pattern command identifies the type of pattern to be applied onto the destination.

EC * v # T

#=0 - Solid black (default) 1 - Solid white

2 - Shading pattern

3 - Cross-hatch pattern

4 - User-defined pattern

Default	=	0
Range	=	0 - 4 (values outside of range are ignored)

This command selects which type of pattern is applied. For values 2, 3, and 4, the shading level (Figure 13-4), cross-hatch pattern (Figure 13-5), or user-defined pattern number is identified by the Pattern ID command described earlier in this chapter.

Notes	For selecting or changing the current pattern, the Select Current
	Pattern (E	*v#T) and the Pattern ID (E	*c#G) commands work
	C	C

together. Sending the current pattern (Select Current Pattern command) alone does not change the current pattern; the Pattern ID must be sent first. However, when selecting solid white (white rule) or solid black (black rule), only the Select Current Pattern command is required.

Once a current pattern is selected, that pattern applies to all images placed on the page until a new pattern is selected.

13-12The PCL Print Model EN