HP 5961-0509 manual Current location, place the pen, Away, with an ending point 0,-1500

Table 20-31 Example: Using the RT Command (Relative Arc

Three Point) (continued)
SP1;	Select pen number 1. Even though
	there is no physical pen, the SP
	command must be used to enable
	printing.
PA1000,100;	Specify the absolute point (1000,100)
	as the starting location.
PR;PD1500,0;	Specify relative plotting, pen down,
	and draw (1500,0) relative plotter
	units from the current pen location
	(1000,100).
PU-1850,1050; PD350,0;	Lift the pen, move (-1850,1050)
	relative coordinates, place the pen
	down, and draw a line 350 plu in the
	X direction.
PU-350,-700; PD350,0;	Lift the pen, move (-350,-700) plu from
	the current location, place the pen
	down, and draw a line 350 plu in the X
	direction.
PU0,-350;PD0,	Lift the pen, move 350 plu to the left,
1500,1500,0;	place the pen down, draw a line 1500
	plu up and then another line 1500
	units to the right.
RT700,-750,0,-1500;	Draw an arc from the current pen
	position through a point (700,-750) plu
	away, with an ending point (0,-1500)
	plu from the beginning of the arc.
PU700,850;PD;	Lift the pen and move it (700,850) plu
	from the current pen position; pen
	down.

20-50The Vector Group EN