HP 5961-0509 manual RA, Fill Rectangle Absolute, Coordinates Current units 230to 230 No default

RA, Fill Rectangle Absolute

This command defines and fills a rectangle using absolute coordinates. Use RA to fill rectangular shapes in drawings. (To outline a rectangle using absolute coordinates, use the EA command.)

RA X,Y[;]

	Parameter	Format	Functional Range	Default
	X,Y coordinates	current units	-230to 230 - 1	no default
	The RA command defines and fills a rectangle using the current pen,
	the current line and fill types, and absolute X,Y coordinates. The RA
	command includes an automatic pen down. When the command
	operation is complete, the original pen location and up/down status
	are restored.
	z X,Y Coordinates — Specify the corner of the rectangle that is
	diagonally opposite from the current pen location (the starting
	point of the rectangle). Coordinates are interpreted in current
	units: as user-units when scaling is on; as plotter units when
	scaling is off.
Note	The following illustration shows the current pen location in the
	lower-left corner and the command’s X,Y coordinates in the

upper-right corner. Depending on the X,Y coordinates used, these points can be in any two diagonally opposite corners.

Figure 21-22Fill Rectangle Absolute

EN RA, Fill Rectangle Absolute 21-39