HP 5961-0509 Half-Line Feed Command, Vertical Cursor Positioning Control Codes, LF Line Feed, ? =

Half-Line Feed Command

The Half-Line Feed command moves the cursor to the same character position one half-line down. The distance moved for a Half-Line Feed is one-half of the current line spacing (defined by the last VMI or line spacing setting).

?=

Vertical Cursor Positioning Control Codes

Two control codes can be used to position the cursor vertically. These control codes are explained below.

LF - Line Feed

Advances the current active position (CAP) to the same horizontal position on the next line. The distance to the next line is defined by the current line spacing (defined by the last VMI or line spacing setting). (Refer to “Line Termination Command” later in this chapter.)

FF - Form Feed

Advances the current active position (CAP) to the same horizontal position at the top of the text area on the next page. (Refer to “Line Termination Command” later in this chapter.)

EN Half-Line Feed Command 6-13