Answering System
For assistance, please visit http://www.panasonic.com/phonehelp 37
Remote operation
Using a touch tone phone, you can call
your phone number from outside and
access the unit to listen to messages. The
unit’s voice guidance prompts you to press
certain dial keys to perform different
operations.
Important:
LIn order to operate the answering
system remotely, you must first set a
remote code (page 38). This code must
be entered each time you operate the
answering system remotely.

Using the answering system

remotely

1Dial your phone number from a touch
tone phone.
2After the greeting message starts, enter
your remote code (page 38).
LThe unit plays back new messages.
LAfter playing back new messages,
the voice guidance starts.
3Follow the voice guidance as
necessary.
4When finished, hang up.
Note:
LYou can ignore the voice guidance and
control the unit using remote commands
(page 37).
Voice guidance
During remote operation, the unit’s voice
guidance prompts you to press {1} to
perform a specific operation, or press {2}
to listen to more available operations.
Operations are presented by voice
guidance in the following order:
– Play back all messages
– Play back new messages
– Record a message
– Erase all messages
Note:
LIf you do not press any dial keys within
10 seconds after a voice guidance
prompt, the unit disconnects your call.
LIf less than 3 minutes of recording time is
available, the unit announces the
remaining recording time after the last
message is played back.
Remote commands
You can press dial keys to access certain
answering system functions without
waiting for the voice guidance to prompt
you.
Key Remote command
{1}Repeat message (during
playback)*1
{2}Skip message (during
playback)
{4}Play new messages
{5}Play all messages
{9}Stop playback*2
{0}Turn answering system off
TG2631_2632.book Page 37 Monday, December 26, 2005 2:02 PM