HP 5961-0509 manual BR, Bezier Relative, LT, Line Type PW,Pen Width

Table 20-11

Related Commands		Group
AA, Arc Absolute		The Vector Group
AR, Arc Relative
BR,	Bezier Relative
BZ,	Bezier Absolute
CI,	Circle
RT, Relative Arc Three Point
LA, Line Attributes		The Line and Fill Attributes Group
LT, Line Type
PW,Pen Width

BR, Bezier Relative

This command draws bezier curves using relative coordinates. This command uses the current pen position as the first control point, and specifies the other three control points as relative increments from the first point.

BR X1,Y1, X2,Y2,X3,Y3,...[X1,Y1, X2,Y2,X3,Y3]]

Parameter	Format	Functional Range	Default
X1, Y1... (control points)	current	-223to 223 - 1	no default
	units

The BR command uses the current pen location and three specified control points to draw a bezier curve. After each new Bezier, the last control point of the previous curve becomes the first control point of the next Bezier. All curve control points are relative to the first control point of that curve. For example, points 1, 2, and 3 of the example are relative to the starting point, while points 4, 5, and 6 are relative to point 3.

EN BR, Bezier Relative 20-19