HP 5961-0509 For Scaling Type, Scaling Form Type Syntax, 19-44The Configuration and Status Group

•Although you must specify both parameters, the printer applies only one: the left parameter applies when there is extra horizontal space; the bottom parameter applies when there is extra vertical space. The following examples illustrate left and bottom parameters of 0% and 100%.

Figure 19-19The Left and Bottom Parameters

For Scaling Type 2:

The third form of scaling, point-factor scaling, sets a specific ratio

of plotter units to user-units, and establishes the user-units coordinate of P1.

Table 19-21

Scaling Form	Type	Syntax
Point Factor	2	SCXMIN,XFACTOR,YMIN,YFACTOR,type[;]

19-44The Configuration and Status Group EN